- Trademark: PTC
- Origin: China
- Transport Package: Container
Customer Question & Answer (0)
This equipment is mainly consists of the main driven part/ the main shaft/ the arm frame parts/ drum parts and base etc, driven by pneumatic motor.
2.Main technical parameters for example
|Drum working load||6T(Each drum 3T)|
|Rope capacity||∅18mmX45m(3 layers)|
|Air motor pressure||~0.63MPa|
|Air motor flow||~23m3/min|
This equipment is mainly consists of the main driven part/ the main shaft/ the arm frame parts/ drum parts and base etc.
The arm frame parts/ base parts and deck welding connection.
The main drive part and the arm frame drum through the coupling.
If the brake band should be replaced, remove all the pins and bolts on the brake band. The brake band will be divided into two parts and can be taken off from the upper side of hub. And at last replace the old bands.
6.Spare parts list
|1||Nut(Copper) M5||12 pcs|
|2||Screw(Copper) M5X20||12 pcs|
|3||Cotter pin 6.3X55/ 4X30||12 pcs|
|4||Nipple M10X1||12 pcs|